3dPrinting :

- modifiche e correzioni per Costolature (Setti -> Ribs).

LuaLibs/AddManData.lua

@@ -1,4 +1,4 @@
--- AddManData.lua by Egaltech s.r.l. 2022/04/12
+-- AddManData.lua by Egaltech s.r.l. 2022/07/03
 -- Raccolta costanti generali per Stampa 3d
 
 -- Tabella per definizione modulo
@@ -31,6 +31,7 @@ MIN_AREA = 0.01
 
 -- Parametri di lavorazione
 SEC_DEFAULT = "Default"
+KEY_PARAMS = "Params"
 KEY_SLICING_45 = "Slicing45"
 KEY_SLICING_DIR="SlicingDir"
 KEY_SLICE_STEP = "StrandH"
@@ -67,18 +68,18 @@ KEY_COASTING_FEED = "CoastingFeed"
 KEY_WIPE_LEN = "WipeLen"
 KEY_WIPE_FEEDPU = "WipeFeedPu"
 KEY_TOOL_DIAM = "ToolDiam" 
-KEY_SETTI_OVERLAP = "SettiOverlap"
-KEY_SETTI_SHELLS_NBR = "SettiStrandCount"
-KEY_SETTI_LINK = "SettiLink"
-KEY_SETTI_INVERT_DIR = "SettiInvertDirection"
-KEY_SETTI_INVERT_ORDER = "SettiInvertOrder"
-KEY_SETTI_LEAD_IN_INVERT = "SettiLeadInInvert"
-KEY_SETTI_LEAD_IN_LEN = "SettiLeadInLen"
-KEY_SETTI_LEAD_OUT_INVERT = "SettiLeadOutInvert"
-KEY_SETTI_LEAD_OUT_LEN = "SettiLeadOutLen"
-KEY_SETTI_LEAD_OUT_WIPE1 = "SettiLeadOutWipeTang"
-KEY_SETTI_LEAD_OUT_WIPE2 = "SettiLeadOutWipe"
-KEY_SETTI_LEAD_OUT_WIPE_DIR = "SettiLeadOutWipeDir"
+KEY_RIBS_OVERLAP = "RibsOverlap"
+KEY_RIBS_SHELLS_NBR = "RibsStrandCount"
+KEY_RIBS_LINK = "RibsLink"
+KEY_RIBS_INVERT_DIR = "RibsInvertDirection"
+KEY_RIBS_INVERT_ORDER = "RibsInvertOrder"
+KEY_RIBS_LEAD_IN_INVERT = "RibsLeadInInvert"
+KEY_RIBS_LEAD_IN_LEN = "RibsLeadInLen"
+KEY_RIBS_LEAD_OUT_INVERT = "RibsLeadOutInvert"
+KEY_RIBS_LEAD_OUT_LEN = "RibsLeadOutLen"
+KEY_RIBS_LEAD_OUT_WIPE1 = "RibsLeadOutWipeTang"
+KEY_RIBS_LEAD_OUT_WIPE2 = "RibsLeadOutWipe"
+KEY_RIBS_LEAD_OUT_WIPE_DIR = "RibsLeadOutWipeDir"
 
 -- Parametri di macchina
 SEC_3DPRINTING = "3dPrinting"
@@ -99,7 +100,7 @@ TYPE = {
    LINK = 4,
    COASTING = 5,
    WIPE = 6,
-   SETTO = 7,
+   RIB = 7,
 }
 
 PRINT_ORDER = {
@@ -126,14 +127,11 @@ LEAD_TYPE = {
 
 
 ---------------------------------------------------------------------
-
 TABLE = "Table"
-TABLE_OUTLINE = "Outline"
-TABLE_SURFACE = "Surface"
 PART = "Part"
 ORIGINAL_SOLID = "OriginalSolid"
 LAY_AUX = "Aux"
-LAY_WALLS = "Walls"
+LAY_RIBS = "Ribs"
 VIEWPARAMS = 'ViewParams'
 IMPORTED_SOLID = 'ImportedSolid'
 RESULT_READ_PROG = 'ResultReadProg'
@@ -148,6 +146,8 @@ KEY_SEL_LAYER = 'SelLayer'
 KEY_SLICE_ADV_MODE = 'SliceAdvMode'
 KEY_SLICE_ADV_PERC = 'SliceAdvPerc'
 
+KEY_MOVED_PART ='MovedPart'
+
 RESULT = {
    OK = 1,
    KO_MINUS = 2,
@@ -163,6 +163,7 @@ LAYER_VIEW_TYPE = {
    ALL = 1,
    TILL_SEL = 2,
    ONLY_SEL = 3,
+   FROM_SEL = 4,
 }
 SHELL_VIEW_TYPE = {
    ALL = 1,
@@ -178,8 +179,8 @@ SLICE_ADV_TYPE = {
 }
 
 ---------------------------------------------------------------------
-SETTI_GRP="Setti"
-SETTI_CRV="Setto"
+RIBS_GRP="Ribs"
+RIBS_CRV="Rib"
 
 
 ---------------------------------------------------------------------