3dPrinting 2.5e3 :

- infill prima versione ( lineari, griglia, zigzag, nido d'ape)
- aggiunto riempimento ad infill anche nei solidi ausiliari
- migliorie varie nella gestione dei riempimenti pieni
- migliorie nei link e in StartPointOffsetOnLayer.

LuaLibs/AddManData.lua

@@ -34,6 +34,7 @@ SURF_LOOP = "SurfLoop"
 MIN_LEN = 0.1
 MIN_AREA = 0.01
 MIN_RIBS_LEN = 2
+MIN_INFILL_LEN = 2
 
 -- Parametri di lavorazione
 SEC_DEFAULT = "Default"
@@ -55,10 +56,6 @@ KEY_TYPE = "Type"
 KEY_LINK_TYPE = "LinkType"
 KEY_LINK_PARAM = "LinkParam"
 KEY_LINK_ZUP = "LinkZup"
-KEY_FLOOR_NBR = "FloorCount"
-KEY_FLOOR_TYPE = "FloorType"
-KEY_CEIL_NBR = "CeilCount"
-KEY_CEIL_TYPE = "CeilType"
 KEY_SPEED = "Speed"
 KEY_FEED = "Feed"
 KEY_EXT_FEED = "ExtFeed"
@@ -81,7 +78,26 @@ KEY_COASTING_FEED = "CoastingFeed"
 KEY_WIPE_LEN = "WipeLen"
 KEY_WIPE_DIR = "WipeDir"
 KEY_WIPE_FEEDPU = "WipeFeedPu"
-KEY_TOOL_DIAM = "ToolDiam" 
+KEY_TOOL_DIAM = "ToolDiam"
+
+-- Solid Fill
+KEY_FLOOR_NBR = "FloorCount"
+KEY_FLOOR_TYPE = "FloorType"
+KEY_CEIL_NBR = "CeilCount"
+KEY_CEIL_TYPE = "CeilType"
+KEY_FILL_TYPE = "FillType"
+
+-- Infill
+KEY_INFILL_TYPE = "InfillType"
+KEY_INFILL_DENSITY = "InfillDensity"
+KEY_INFILL_OVERLAP = "InfillOverlap"
+KEY_INFILL_GRID_OVERLAP = "InfillGridOverlap"
+KEY_INFILL_DIR = "InfillDirection"
+KEY_INFILL_OFFSET_X = "InfillOffsetX"
+KEY_INFILL_OFFSET_Y = "InfillOffsetY"
+KEY_INFILL_COASTING = "InfillCoasting"
+KEY_INFILL_WIPE = "InfillWipe"
+KEY_INFILL_WIPE_DIR = "InfillWipeDir"
 
 -- Ribs
 KEY_RIBS_TYPE = "RibsType"
@@ -125,12 +141,18 @@ KEY_EXTRA_SHELL_WIPE = "ExtraShellWipe"
 KEY_EXTRA_SHELL_WIPE_DIR = "ExtraShellWipeDir"
 
 -- Solidi ausiliari
+KEY_AUX_SOLIDS_OVERLAP = "AuxSolidsOverlap"
 KEY_AUX_SOLIDS_INFILL = "AuxSolidsInfill"
 KEY_AUX_SOLIDS_PRINT_ORDER = "AuxSolidsStrandOrder"
-KEY_AUX_SOLIDS_OVERLAP = "AuxSolidsOverlap"
 KEY_AUX_SOLIDS_LINK_TYPE = "AuxSolidsLinkType"
-KEY_AUX_SOLIDS_SP_OFFSET = "AuxSolidsStartPointOffsetOnSlice"
 KEY_AUX_SOLIDS_LINK_PARAM = "AuxSolidsLinkParam"
+KEY_AUX_SOLIDS_SP_OFFSET = "AuxSolidsStartPointOffsetOnSlice"
+KEY_AUX_SOLIDS_LP_OFFSET = "AuxSolidsOffsetLeadPoint"
+KEY_AUX_SOLIDS_DENSITY = "AuxSolidsDensity"
+KEY_AUX_SOLIDS_DIR = "AuxSolidsDirection"
+KEY_AUX_SOLIDS_OFFSET_X = "AuxSolidsOffsetX"
+KEY_AUX_SOLIDS_OFFSET_Y = "AuxSolidsOffsetY"
+KEY_AUX_SOLIDS_GRID_OVERLAP = "AuxSolidsGridOverlap"
 KEY_AUX_SOLIDS_COASTING_LEN = "AuxSolidsCoastingLen"
 KEY_AUX_SOLIDS_WIPE_LEN = "AuxSolidsWipeLen"
 KEY_AUX_SOLIDS_WIPE_DIR = "AuxSolidsWipeDir"
@@ -156,7 +178,14 @@ KEY_ASSOCIATED_CRVS = "AssociatedCrvs"
 KEY_ORIGINAL_SURF = "OriginalSurf"
 KEY_HAS_SOLIDS = "Solids"
 KEY_BOX_MIN_Z = "PartBoxMinZ"
-KEY_START_POINT = "StartPoint"
+KEY_ORIGINAL_START_POINT = "OriginalStartPoint"
+KEY_FIRST_SOLID_LAY = "FirstSolidLay"
+KEY_LAST_SOLID_LAY = "LastSolidLay"
+KEY_ASSOCIATED_TP_CRV = "AssociatedToolPathCrv"
+KEY_ASSOCIATED_P_CRV = "AssociatedPathCrv"
+KEY_INTERNAL_SRF_LOOP = "InternalSrfLoop"
+KEY_PREV_CRV = "PrevCrv"
+KEY_NEXT_CRVS = "NextCrvs"
 
 SLICING_TYPE = {
    VERTICAL = 1,
@@ -211,10 +240,21 @@ LEAD_TYPE = {
    ARC = 3,
 }
 
-INFILL_TYPE = {
-   NONE = 1,
-   OFFSET = 2,
-   ZIGZAG = 3,
+FILL_CATEGORY = {
+   NONE = 0,
+   SOLID_FILL = 16,
+   INFILL = 32,
+}
+
+FILL_TYPE = {
+   NONE = 0,
+   OFFSET = 16,
+   ZIGZAG = 17,
+   LINES = 32,
+   GRID = 33,
+   ZIG_ZAG_GRID = 34,
+   HONEYCOMB = 35,
+   HONEYCOMB_GRID = 36,
 }
 
 RIB_TYPE = {
@@ -293,9 +333,14 @@ SHELL_NBR_CRV = "ShellNbrRegion"
 SHELL_NBR_SURF = "ShellNbrSurf"
 
 AUX_SOLIDS_GRP = "AuxSolids"
+AUX_SOLIDS_INFILL_GRP = "InfillAuxSolids"
 AUX_SOLIDS_CRV = "AuxSolid"
+AUX_SOLIDS_INFILL_CRV = "InfillAuxSolid"
 AUX_SOLIDS_SRF = "SrfAuxSolid"
 
+INFILL_GRP = "Infill"
+INFILL_CRV = "InfillCrv"
+
 ---------------------------------------------------------------------
 -- parametri calcolo tempi, F ed S
 LAY_TFSCALC = "TFSCalc"